Data / Product recalls / Terex South Dakota, Inc.
Terex South Dakota, Inc.: 40 recalls from 2015 to 2026 (NHTSA)
Terex South Dakota, Inc. is named in 40 recalls from 2015 to 2026: all from the NHTSA. The latest, on October 2, 2026, covers Terex General 65, C6000, C4000 (2020 to 2022) (100). Hazard: The pintle hitch may fail, causing a loss of trailer control and increasing the risk of a crash. Source: NHTSA recall 26V639000.
SpecStream is the live web data engine for teams and agents. It reads every recall from the CPSC, FDA and NHTSA each morning, and this page is that reading. Ask for the brands, categories or stores you follow and each new recall arrives in your sheet, CRM, Slack or agent as the agency publishes it.
- Agencies
- National Highway Traffic Safety Administration
- First recall
- February 3, 2015
- Latest recall
- October 2, 2026
Recalls
Each recall is listed once, with the role this firm has in it. Roles: manufacturer (40).
| Date | Agency | Product | Hazard | Units | Remedy | Sold at | Role | Source |
|---|---|---|---|---|---|---|---|---|
| October 2, 2026 | NHTSA | Terex General 65, C6000, C4000 (2020 to 2022) | The pintle hitch may fail, causing a loss of trailer control and increasing the risk of a crash. | 100 | Ring Power will inspect, replace the pintle hitch, and install bracing. Damaged bumpers will be replaced. All repairs will be performed free of charge. Owner notification letters are expected to be mailed October 16, 2026. Owners may... | Manufacturer | nhtsa.gov | |
| August 17, 2026 | NHTSA | Terex C5000, C6000, General 65 (2019 to 2026) | Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck. | 73 | Ring Power will inspect and replace the weldment plate as necessary, free of charge. Owner notification letters are expected to be mailed September 2026. Owners may contact Ring Power's customer service at 1-904-737-7730. Ring Power's... | Manufacturer | nhtsa.gov | |
| March 30, 2026 | NHTSA | Terex Pole Position Guide ARM Assembly PIN | Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck. | 3,015 | Owners will inspect the plate weldment for any cracks or abnormal welds. Dealers or owners will replace the plate weldment as necessary, free of charge. Owner notification letters were mailed June 2, 2026. Owners may contact Terex's... | Manufacturer | nhtsa.gov | |
| March 19, 2026 | NHTSA | Terex General 65, General 80, C4000 (2019 to 2026) | Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck. | 2,303 | Owners will inspect the plate weldment for any cracks or abnormal welds. Dealers or owners will replace the plate weldment as necessary, free of charge. Owner notification letters were mailed June 2, 2026. Owners may contact Terex's... | Manufacturer | nhtsa.gov | |
| January 12, 2026 | NHTSA | Terex TL-Series, HR40, HR46 (2025) | Touching parts of the overheated hydraulic equipment can increase the risk of burn injuries. | 88 | Dealers will inspect and repair the control valve as necessary, free of charge. Owner notification letters were mailed January 23, 2026. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN735. | Manufacturer | nhtsa.gov | |
| August 29, 2025 | NHTSA | Altec, Terex (2011 to 2025) | A cable step that fails during use increases the risk of injury. | 903 | Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner... | Manufacturer | nhtsa.gov | |
| October 3, 2024 | NHTSA | Terex TM-Series, TL-Series (2023 to 2024) | A failed weld can result in the cylinder rod separating from the cylinder, increasing the risk of injury. | 37 | Dealers will replace the jib extension cylinders, free of charge. Owner notification letters were mailed November 7, 2024. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN732. | Manufacturer | nhtsa.gov | |
| July 11, 2024 | NHTSA | Terex XT PRO (2020 to 2024) | Tilting of the basket may cause the basket occupants to fall, increasing the risk of an injury. | 172 | Dealers will replace the retaining pins, free of charge. Owner notification letters were mailed September 10, 2024. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN729. | Manufacturer | nhtsa.gov | |
| June 13, 2024 | NHTSA | Terex TM-Series (2022 to 2023) | A platform that cannot maintain a level position increases the risk of injury. | 121 | Dealers will reprogram or replace the leveling controller, free of charge. Owner notification letters were mailed August 1, 2024. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN728. | Manufacturer | nhtsa.gov | |
| January 25, 2024 | NHTSA | Terex Advance, Terex (2023) | Improperly tightened boom rotation bearing bolts may fail, causing the boom to fall, and increasing the risk of injury. | 340 | Dealers will tighten the boom rotation bearing bolts, free of charge. Owner notification letters were mailed February 23, 2024. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN724. | Manufacturer | nhtsa.gov | |
| October 19, 2023 | NHTSA | Terex TL48 (2021 to 2023) | An aerial device that falls increases the risk of injury. | 17 | Dealers will replace the mounting bolts and washers, free of charge. Owner notification letters were mailed November 17, 2023. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN723. | Manufacturer | nhtsa.gov | |
| June 2, 2023 | NHTSA | Terex TL (2021) | An aerial device that falls increases the risk of injury. | 8 | Dealers will inspect the subframe for cracks and remove and reweld the joint, as necessary, free of charge. Owner notification letters were mailed June 29, 2023. Owners may contact Terex customer service at 1-605-882-4000. Terex's number... | Manufacturer | nhtsa.gov | |
| December 2, 2022 | NHTSA | Terex C5000, TL, C4000 (2022) | A cracked weld may lead to the boom failing, increasing the risk of an injury. | 431 | Dealers will replace or repair the boom, free of charge. Owner notification letters were mailed on February 8, 2023. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN715. | Manufacturer | nhtsa.gov | |
| December 1, 2022 | NHTSA | Terex Optima TC, XT PRO, C4000 (2022) | A drifting cylinder may result in the machine tipping, increasing the risk of injury. | 40 | Dealers will replace the cylinders, free of charge. All affected vehicles were inspected and remedied by December 22, 2022. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN714. | Manufacturer | nhtsa.gov | |
| September 8, 2022 | NHTSA | Terex TL (2019 to 2022) | A platform that tips during use increases the risk of an injury. | 194 | Dealers will install reinforcement plates to the boom tip platform leveling cylinder bosses, and, all TL80/112 aerial devices will have the hydraulic storage latch for the elevator replaced, free of charge. Owner notification letters were... | Manufacturer | nhtsa.gov | |
| March 31, 2022 | NHTSA | Terex XT PRO (2020 to 2022) | Pin retainer failure may cause the boom to fall, increasing the risk of an injury. | 1,359 | Dealers will inspect and lubricate all pivot points, if necessary, free of charge. Owner notification letters are expected to be mailed on April 29, 2022. Owners may Terex's customer service at 1-605-882-4000. Terex's number for this... | Manufacturer | nhtsa.gov | |
| March 8, 2022 | NHTSA | Terex Optima TCX, Optima HRX, OM (2016 to 2021) | Unintended boom movement increases the risk of injury. | 17 | Dealers will install engine stop/start controls at both control stations, as necessary, and install placards, free of charge. Owner notification letters were mailed on April 13, 2022. Owners may contact Terex's customer service at... | Manufacturer | nhtsa.gov | |
| November 11, 2020 | NHTSA | Terex TL80, TL100 (2019 to 2020) | If the rotation bearing bolts fail, the boom could fall, increasing the risk of injury or death. | 40 | Terex will notify owners, and dealers will install Field Service Kit Z1604 which includes replacement rotation bearing bolts, washers, pedestal reinforcement plates, and bolt spacers, free of charge. Owners are advised to perform a... | Manufacturer | nhtsa.gov | |
| April 29, 2020 | NHTSA | Terex TL80/112, TL80 (2019 to 2020) | If the aerial device is used with the chassis out of level it may result in an unstable condition which may cause the unit to tip, increasing the risk of injury to the operator and any bystanders. | 43 | Terex will notify owners, and dealers will replace the incorrect slope indicator and decals, free of charge. The recall began May 12, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is... | Manufacturer | nhtsa.gov | |
| April 7, 2020 | NHTSA | Terex Digger Derrick (2018 to 2019) | A disabled remote engine start/stop prevents the digger derrick operator from shutting the engine off during hydraulic issues on the digger, increasing the risk of injury. | 20 | Terex will notify owners, and dealers will reprogram the engine computer program, free of charge. The recall began April 16, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN682. | Manufacturer | nhtsa.gov | |
| March 20, 2020 | NHTSA | Terex TCX, SML (2009 to 2016) | If the rod eye fails the lift boom will drift down. The remaining cylinder may not support the boom fully and will slowly leak down. These scenarios increase the risk of an injury. | 6 | Terex will notify owners, and dealers will replace the rod eyes and shims, free of charge. The recall began April 9, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN684. | Manufacturer | nhtsa.gov | |
| February 24, 2020 | NHTSA | Terex TM-Series (2011 to 2020) | If the platform level limit switch does not stop the platform from tilting, a platform occupant could fall, increasing the risk of an injury. | 523 | Terex will notify owners, and dealers will properly install the limit switch, free of charge. The recall began April 14, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN681. | Manufacturer | nhtsa.gov | |
| September 17, 2019 | NHTSA | Terex TLM (2016 to 2017) | Uncontrolled movement of the boom can increase the risk of an injury. | 42 | Terex will notify owners, and dealers will replace the base end holding valve on the upper boom lift cylinder, free of charge. The recall began October 25, 2019. Owners may contact Terex customer service at 1-844-837-3948. Terex's number... | Manufacturer | nhtsa.gov | |
| November 9, 2018 | NHTSA | Terex Digger Derrick (2017 to 2018) | If the pole guide arm falls, it may strike any nearby personnel, increasing the risk of injury. | 1,275 | Terex will notify owners, and dealers will replace the affected guide bars, free of charge. The recall is expected to begin December 14, 2018. Owners may contact Terex at 1-605-882-4000. Terex's recall number for this recall is SN669. | Manufacturer | nhtsa.gov | |
| August 7, 2018 | NHTSA | Terex C4000, General 80, C6000 (2015 to 2018) | If the auger falls, it can increase the risk of injury to the user or bystanders. | 101 | Terex will notify owners, and dealers will either repair the weld or replace the affected component, free of charge. The recall began October 3, 2018. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this... | Manufacturer | nhtsa.gov | |
| January 8, 2018 | NHTSA | Terex XT PRO 60, XT PRO 56 (2015 to 2017) | If the rotation system moves without the enable being depressed, it can increase the risk of injury. | 1,526 | Terex will notify owners, and dealers will inspect the single stick controls, making sure that they are assembled correctly and adjusted properly, free of charge. The recall began on March 7, 2018. Owners may contact Terex customer service... | Manufacturer | nhtsa.gov | |
| May 15, 2017 | NHTSA | Terex Digger Derrick, Aerial Devices (2012 to 2017) | If the hood switch prevents the remote engine controls from shutting the vehicle engine down in the event of a hydraulic issue on the Aerial or Digger Derrick, it may increase the risk of an injury. | 444 | TSD will notify owners, and dealers will reprogram the vehicles to only disable the engine start function if the switch indicates that the hood is open, free of charge. The recall began on June 28, 2017. Owners may contact TSD Customer... | Manufacturer | nhtsa.gov | |
| May 15, 2017 | NHTSA | Terex Aerial Devices, Digger Derrick (2007 to 2016) | Without proper protection against electrical shock, the user has a greater risk of injury. | 58 | TSD will notify owners, and dealers will replace the breakers with GFCI breakers that will trip at a lower current, free of charge. The recall began on June 27, 2017. Owners may contact TSD Customer Service Department at 1-800-982-8975.... | Manufacturer | nhtsa.gov | |
| November 4, 2016 | NHTSA | Terex TC, TCX (2009 to 2014) | Inadvertent boom movement can cause the platform to strike objects in the work area, increasing the risk of injury to the operator. | 6 | TSD will notify owners, and dealers will install a diode and alter the wiring to correct the issue, free of charge. The recall began on November 20, 2016. Owners may contact TSD customer service at 1-800-982-8975. TSD's number for this... | Manufacturer | nhtsa.gov | |
| June 28, 2016 | NHTSA | Terex HRX, HR, TC (2015 to 2016) | If the platform tilts, the platform occupant may fall, increasing their risk of injury. | 400 | TSD will notify owners, and dealers will replace the hydraulic cylinders, free of charge. The recall began on August 22, 2016. Owners may contact TSD Customer Service Department at 1-800-982-8975. TSD's number for this recall is SN642. | Manufacturer | nhtsa.gov | |
| June 14, 2016 | NHTSA | Terex LTM, HRX, TC (2016) | Unexpected boom rotation or winch movement may increase the risk of injury. | 440 | TSD will notify owners, and instruct owners to inspect the hydraulic motor. Motors within a certain serial number range will be replaced, free of charge. The recall began on August 3, 2016. Owners may contact TSD customer service at... | Manufacturer | nhtsa.gov | |
| April 21, 2016 | NHTSA | Terex XT60, XT52, XT55 (2001 to 2003) | Booms made from weaker materials may crack and fail, increasing the risk of injury to the boom operator or those nearby. | 1,332 | Terex will notify owners, and dealers will inspect the lower boom to verify that it was made with the correct material. Any boom that was made with an improper material will be replaced, free of charge. The recall began on June 9, 2016.... | Manufacturer | nhtsa.gov | |
| March 29, 2016 | NHTSA | Terex Aerial Devices (2011 to 2016) | If the platform tilts unexpectedly, the user may fall, increasing their risk of injury. | 2,153 | Terex will notify owners. Terex will notify owners and provide a leveling sprocket for any unit with a cracked weld on the leveling sprocket or provide a reinforcement kit for any unit without a cracked weld on the leveling sprocket, free... | Manufacturer | nhtsa.gov | |
| March 28, 2016 | NHTSA | Terex Aerial Devices (2007 to 2013) | Cracks, if not repaired, may result in the failure of the aerial pedestal, increasing the risk of injury to the operator or those nearby. | 33 | Terex will notify owners, and dealers will install reinforcement plates on the pedestal, free of charge. The recall began on April 22, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is... | Manufacturer | nhtsa.gov | |
| March 16, 2016 | NHTSA | Terex TM125, HRX, C5000 (2008 to 2016) | If the outrigger lifts off the ground, causing instability of the truck, it can increase the risk of injury to the operator. | 131 | Terex will notify owners, and dealers will install a second outrigger enable relay, free of charge. The recall began on April 29, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is SN636. | Manufacturer | nhtsa.gov | |
| February 29, 2016 | NHTSA | Terex Aerial Devices (2008 to 2015) | Repeated contact may result in the rod eyes cracking. This cracking can lead to the failure of the boom tip leveling cylinder rod eye and the platform tilting unexpectedly which could cause the occupants to fall from the aerial platform... | 465 | Terex will notify owners, and dealers will modify the aerial devices to prevent the components from making contact. The recall began on April 11, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this... | Manufacturer | nhtsa.gov | |
| January 26, 2016 | NHTSA | Terex Aerial Devices (2011 to 2015) | If the leveling system fails, the aerial platform may tilt, increasing the risk of injury to the user or those nearby. | 73 | Terex will notify owners, and dealers will install a stop to prevent excessive cylinder linkage movement, free of charge. The recall began on February 22, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number... | Manufacturer | nhtsa.gov | |
| August 13, 2015 | NHTSA | Terex Digger Derrick, Aerial Devices (2013 to 2014) | Outrigger drifting could result in the platform falling and seriously injuring platform occupants or bystanders. | 386 | Terex will notify owners, and dealers will install the orifice and replace the affected valves, free of charge. The recall began on November 5, 2015. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this... | Manufacturer | nhtsa.gov | |
| March 23, 2015 | NHTSA | Terex Digger Derrick, Aerial Devices (2014 to 2015) | If the attaching bolts fail, the boom may fall, increasing the risk of injury to the operator or those nearby. | 97 | Terex will notify owners, and dealers will check the affected bolts, replacing them as necessary, free of charge. The recall begin on March 27, 2015. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this... | Manufacturer | nhtsa.gov | |
| February 3, 2015 | NHTSA | Terex HI-Ranger (2013) | If the platform rotates without operator control, there is an increased risk of injury. | 305 | Terex will notify owners, and dealers will replace the cylinder, free of charge. The recall began Feburary 17, 2015. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN614. | Manufacturer | nhtsa.gov |
By agency
| Agency | Recalls | Latest |
|---|---|---|
| National Highway Traffic Safety Administration | 40 | October 2, 2026 |
Categories
| Category | Recalls |
|---|---|
| Vehicle recalls: equipment | 29 |
| Vehicle recalls: structure | 7 |
| Vehicle recalls: electrical system | 4 |
| Vehicle recalls: suspension | 1 |
| Vehicle recalls: engine | 1 |
| Vehicle recalls: trailer hitches | 1 |
Where each agency publishes its recalls
Updated October 2, 2026. Read from National Highway Traffic Safety Administration recall data. Public domain (U.S. government work). Recalls are as the agencies published them: the CPSC, FDA (food enforcement reports) and NHTSA. A firm is one firm only when its exact name and country match; the CPSC and FDA print no firm ID. Stores are listed only when the agency's sold-at text names them, and an agency often adds that more stores sold the product. Categories are grouped by SpecStream from the words in the agency's title and product text. Free to reuse with credit to SpecStream under CC BY 4.0. Spot a wrong value? Write to [email protected] with the link to this page.