Skip to the page

Data / Federal rules / 2026-04348

Airworthiness Directives; Schempp-Hirth Flugzeugbau GmbH Gliders

The Federal Aviation Administration published this final rule in the Federal Register on March 5, 2026. It took effect on April 9, 2026.

SpecStream is the live web data engine for teams and agents. It reads every rule and proposed rule in the Federal Register each morning, and this page is that reading. Name your industry once and new rules, comment deadlines and effective dates arrive in your sheet, CRM, Slack or agent as they are published.

What the agency says

The FAA is adopting a new airworthiness directive (AD) for certain Schempp-Hirth Flugzeugbau GmbH (Schempp-Hirth) Model STANDARD CIRRUS gliders. This AD was prompted by reports of a broken outer race of the lower ball bearing installed in the all-moving horizontal tailplane drive fitting. This AD requires inspecting the elevator drive fitting to determine the type of lower ball bearing installed, and depending upon the results, replacing the lower ball bearing with a serviceable part. The FAA is issuing this AD to address the unsafe condition on these products.

Key facts

Document number
2026-04348
Type
Final rule
Action
Final rule
Agency
Transportation Department; Federal Aviation Administration
Published
March 5, 2026
Takes effect
April 9, 2026
Dates
This AD is effective April 9, 2026.
Docket
Docket No. FAA-2025-1362; Project Identifier MCAI-2025-00062-G; Amendment 39-23253; AD 2026-03-04
Regulation ID (RIN)
2120-AA64
Code of Federal Regulations
14 CFR 39
Topics
Air transportation; Aircraft; Aviation safety; Incorporation by reference; Safety
Pages
3

The document on federalregister.gov PDF

Other documents from the Federal Aviation Administration

Everything from the Federal Aviation Administration · Rules on air transportation · Rules on aircraft · Rules on aviation safety · Published in March 2026

Read from the Federal Register API, last updated 2026-10-23. The document on federalregister.gov is the official record; dates and dockets can change through later corrections. Free to reuse with credit to SpecStream under CC BY 4.0.