Data / Federal rules / 2026-16502
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The Federal Aviation Administration published this proposed rule in the Federal Register on August 13, 2026. Comments closed on September 28, 2026.
SpecStream is the live web data engine for teams and agents. It reads every rule and proposed rule in the Federal Register each morning, and this page is that reading. Name your industry once and new rules, comment deadlines and effective dates arrive in your sheet, CRM, Slack or agent as they are published.
What the agency says
The FAA proposes to supersede Airworthiness Directive (AD) 2025-26-03, which applies to certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000- CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H engines. AD 2025-26-03 requires repetitive borescope inspections (BSIs) of the high-pressure compressor (HPC) rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. AD 2025-26-03 also allows an alternative method of complying with the repetitive BSIs if certain actions are accomplished. Since the FAA issued AD 2025-26-03, RRD published updated service material with a revised bolting arrangement at the HPC rotor shaft to high-pressure turbine (HPT) rotor disc interface to address the unsafe condition. This proposed AD would require repetitive BSIs of the HPC rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. This proposed AD would also allow an alternative method of complying with BSIs if certain actions are accomplished, and require modification of the bolting arrangement as a terminating action for the repetitive BSIs. The FAA is proposing this AD to address the unsafe condition on these products.
Key facts
- Document number
- 2026-16502
- Type
- Proposed rule
- Action
- Notice of proposed rulemaking (NPRM)
- Agency
- Transportation Department; Federal Aviation Administration
- Published
- August 13, 2026
- Comments due
- September 28, 2026
- Dates
- The FAA must receive comments on this NPRM by September 28, 2026.
- Docket
- Docket No. FAA-2026-7240; Project Identifier MCAI-2025-01635-E
- Regulation ID (RIN)
- 2120-AA64
- Code of Federal Regulations
- 14 CFR 39
- Topics
- Air transportation; Aircraft; Aviation safety; Incorporation by reference; Safety
- Pages
- 4
Other documents from the Federal Aviation Administration
| Document | Type | Published |
|---|---|---|
| Establishment of Class E Airspace; Canton, IL 2026-21817 | Final rule | Oct 26 |
| Airworthiness Directives; The Boeing Company Airplanes; Correction 2026-21686 | Final rule | Oct 23 |
| Airworthiness Directives; MD Helicopters, LLC Helicopters 2026-21664 | Final rule | Oct 23 |
| Airworthiness Directives; General Electric Company Engines 2026-21590 | Final rule | Oct 22 |
| Establishment of Class E Airspace; Havana, IL 2026-21565 | Final rule | Oct 22 |
| Revocation of Class E Airspace; Santa Elena, TX 2026-21564 | Final rule | Oct 22 |
| Establishment of Class E Airspace; DeKalb, IL 2026-21563 | Final rule | Oct 22 |
| Airspace Designations; Incorporation by Reference Amendment of FAA Order JO 7400.11M 2026-21422 | Final rule | Oct 20 |
Everything from the Federal Aviation Administration · Rules on air transportation · Rules on aircraft · Rules on aviation safety · Published in August 2026
Read from the Federal Register API, last updated 2026-10-24. The document on federalregister.gov is the official record; dates and dockets can change through later corrections. Free to reuse with credit to SpecStream under CC BY 4.0.