Skip to the page

Data / Federal rules / 2026-13481

Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines

The Federal Aviation Administration published this final rule in the Federal Register on July 2, 2026. It took effect on July 17, 2026. Comments closed on August 17, 2026.

SpecStream is the live web data engine for teams and agents. It reads every rule and proposed rule in the Federal Register each morning, and this page is that reading. Name your industry once and new rules, comment deadlines and effective dates arrive in your sheet, CRM, Slack or agent as they are published.

What the agency says

The FAA is superseding Airworthiness Directive (AD) 2024-25- 10, which applied to certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent XWB-97 engines. AD 2024-25-10 required a one-time set of visual and dimensional inspections of the main fuel hose assembly of the fuel manifold to confirm softness, compliance, and lack of resistance, and for shrinkage, cracks, chafing, dents, kinks, necking, and degradation of the hose braid wire; and, if necessary, replacement of the main fuel hose assembly of the fuel manifold. Since the FAA issued AD 2024-25-10, the FAA has determined that additional engine models are affected by the unsafe condition and that the required inspections should be repetitive. This AD requires, for certain engines, a one-time set of on-wing visual and dimensional inspections of the main fuel hose assembly of the fuel manifold to confirm softness, compliance, and lack of resistance, and for shrinkage, cracks, chafing, dents, kinks, necking, and degradation of the hose braid wire and, if necessary, replacement of the main fuel hose assembly of the fuel manifold. This AD also requires, for certain other engines, on-wing and in-shop repetitive visual and dimensional inspections of the main fuel hose assembly of the fuel manifold to confirm softness, compliance, and lack of resistance, and for shrinkage, cracks, chafing, dents, kinks, necking, and degradation of the hose braid wire and, if necessary, replacement of the main fuel hose assembly of the fuel manifold. This AD also expands the applicability to include certain RRD Model Trent XWB-75, Trent XWB-79, Trent XWB-79B, and Trent XWB-84 engines. This AD also provides criteria for installation of an affected part and optional terminating action for the repetitive visual and dimensional inspections. The FAA is issuing this AD to address the unsafe condition on these products.

Key facts

Document number
2026-13481
Type
Final rule
Action
Final rule; request for comments
Agency
Transportation Department; Federal Aviation Administration
Published
July 2, 2026
Takes effect
July 17, 2026
Comments due
August 17, 2026
Dates
This AD is effective July 17, 2026.
Docket
Docket No. FAA-2026-4661; Project Identifier MCAI-2025-01530-E; Amendment 39-23388; AD 2026-13-06
Regulation ID (RIN)
2120-AA64
Code of Federal Regulations
14 CFR 39
Topics
Air transportation; Aircraft; Aviation safety; Incorporation by reference; Safety
Pages
4

The document on federalregister.gov PDF

Other documents from the Federal Aviation Administration

Everything from the Federal Aviation Administration · Rules on air transportation · Rules on aircraft · Rules on aviation safety · Published in July 2026

Read from the Federal Register API, last updated 2026-10-23. The document on federalregister.gov is the official record; dates and dockets can change through later corrections. Free to reuse with credit to SpecStream under CC BY 4.0.