Data / Federal rules / 2025-11340
Airworthiness Directives; CFM International, S.A. Engines
The Federal Aviation Administration published this final rule in the Federal Register on June 20, 2025. It took effect on July 25, 2025.
SpecStream is the live web data engine for teams and agents. It reads every rule and proposed rule in the Federal Register each morning, and this page is that reading. Name your industry once and new rules, comment deadlines and effective dates arrive in your sheet, CRM, Slack or agent as they are published.
What the agency says
The FAA is superseding Airworthiness Directive (AD) 2023-09- 06, which applied to all CFM International, S.A. Model (CFM) LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, and LEAP- 1A35A (LEAP-1A) engines. AD 2023-09-06 required replacement of certain high-pressure turbine (HPT) rotor stage 1 disks (HPT stage 1 disks), forward outer seals, and compressor rotor stages 6-10 spools. AD 2023- 09-06 also prohibited installation of an HPT stage 1 disk, forward outer seal, or compressor rotor stages 6-10 spool that has a part number and serial number identified in the service information onto any engine. Since the FAA issued AD 2023-09-06, the manufacturer identified additional affected parts that were manufactured from material suspected to have reduced material properties due to iron inclusion, which prompted this AD. This AD retains the requirements to replace certain HPT stage 1 disks, forward outer seals, and compressor rotor stages 6-10 spools and expands the applicability to include additional affected parts manufactured from the same material suspected to have reduced material properties due to iron inclusion. The FAA is issuing this AD to address the unsafe condition on these products.
Key facts
- Document number
- 2025-11340
- Type
- Final rule
- Action
- Final rule
- Agency
- Transportation Department; Federal Aviation Administration
- Published
- June 20, 2025
- Takes effect
- July 25, 2025
- Dates
- This AD is effective July 25, 2025.
- Docket
- Docket No. FAA-2024-2668; Project Identifier AD-2024-00561-E; Amendment 39-23061; AD 2025-12-03
- Regulation ID (RIN)
- 2120-AA64
- Code of Federal Regulations
- 14 CFR 39
- Topics
- Air transportation; Aircraft; Aviation safety; Incorporation by reference; Safety
- Pages
- 4
Other documents from the Federal Aviation Administration
| Document | Type | Published |
|---|---|---|
| Establishment of Class E Airspace; Canton, IL 2026-21817 | Final rule | Oct 26 |
| Airworthiness Directives; The Boeing Company Airplanes; Correction 2026-21686 | Final rule | Oct 23 |
| Airworthiness Directives; MD Helicopters, LLC Helicopters 2026-21664 | Final rule | Oct 23 |
| Airworthiness Directives; General Electric Company Engines 2026-21590 | Final rule | Oct 22 |
| Establishment of Class E Airspace; Havana, IL 2026-21565 | Final rule | Oct 22 |
| Revocation of Class E Airspace; Santa Elena, TX 2026-21564 | Final rule | Oct 22 |
| Establishment of Class E Airspace; DeKalb, IL 2026-21563 | Final rule | Oct 22 |
| Airspace Designations; Incorporation by Reference Amendment of FAA Order JO 7400.11M 2026-21422 | Final rule | Oct 20 |
Everything from the Federal Aviation Administration · Rules on air transportation · Rules on aircraft · Rules on aviation safety · Published in June 2025
Read from the Federal Register API, last updated 2026-10-24. The document on federalregister.gov is the official record; dates and dockets can change through later corrections. Free to reuse with credit to SpecStream under CC BY 4.0.